Changelog for Pegg 0.23
------------------------

	Pegg 0.23 - Linux support for Casio label printers.

	Copyright (c) 2003,2004 Daniel Amkreutz, <daniel.amkreutz@tu-harburg.de>
                  (c) 2004 Alex Perry, <alex@pamurray.com>
    
        IMPORTANT NOTICE:

	* This software was designed using data made available by and is released
          with the permission of CASIO COMPUTER CO., LTD.
        * CASIO COMPUTER Co., LTD. assumes no responsibility for the content of
          this software.
        * Please do not contact CASIO COMPUTER CO., LTD. with any inquiries
          concerning this software.

	A large amount of code is borrowed from the libusb Documentation.
	The communication API of the Printer has been greatly documented
	and published by CASIO COMPUTER CO., LTD

							Many Thanks.

        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; either version 2 of the License, or
        (at your option) any later version.

	You may use this program for whatever you want as long the above written
	text remains.

	Please support Pegg by testing it and reporting bugs. !

------
New in 0.23:
- -w switch defines now the maximum printing width. If the label is smaller, the width
  will be adjusted. Contributed by Alex Perry

New in 0.22:
- Export to a pnm-file instead of printing a label. Contributed by Alex Perry
- Documentation rewritten
- Uninstallation target in makefile

New in 0.21:
- support for label sizes from 0px up to 2560px
- new commandline handler

New in 0.20a:
- test support for different lable sizes on KL-P1000 & KL-E11

Fixed in 0.16:
- Problems printing multiple times under some Linux Distributions

Fixed in 0.15:
- Makefile included
- some code enhancements inspired by M. Reising

New in 0.14a:
- printing support for KL-P1000
- better error handling

New in 0.13a:
- complete communication for KLP1000 label Printer (untested jet)

Fixed in 0.12a:

- Corrected output for pegg -t on a KLP1000 label Printer
- included a better test_raw