# Makefile.in generated by automake 1.6.3 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.1 $ 
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# the SUBDIRS is filled automatically by am_edit. If files are 
# in this directory they are installed into the english dir
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AR = @AR@
ARTSCCONFIG = @ARTSCCONFIG@
AS = @AS@
AUTODIRS = @AUTODIRS@
AWK = @AWK@
CC = @CC@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CXX = @CXX@
CXXCPP = @CXXCPP@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOPIDLNG = @DCOPIDLNG@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@
DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@
DPMSINC = @DPMSINC@
DPMSLIB = @DPMSLIB@
ECHO = @ECHO@
EGREP = @EGREP@
F77 = @F77@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GLINC = @GLINC@
GLLIB = @GLLIB@
GMSGFMT = @GMSGFMT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JAR = @JAR@
JAVAC = @JAVAC@
JAVAH = @JAVAH@
JVMLIBS = @JVMLIBS@
KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
KCONFIG_COMPILER = @KCONFIG_COMPILER@
KDECONFIG = @KDECONFIG@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@
KDE_HAVE_DOT = @KDE_HAVE_DOT@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
KDE_MT_LIBS = @KDE_MT_LIBS@
KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBBZ2 = @LIBBZ2@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBGEN = @LIBGEN@
LIBJPEG = @LIBJPEG@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBPYTHON = @LIBPYTHON@
LIBQIMGIO = @LIBQIMGIO@
LIBRESOLV = @LIBRESOLV@
LIBSHADOW = @LIBSHADOW@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBSSL = @LIBSSL@
LIBTIFF = @LIBTIFF@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBZ = @LIBZ@
LIB_JASPER = @LIB_JASPER@
LIB_KAB = @LIB_KAB@
LIB_KABC = @LIB_KABC@
LIB_KDECORE = @LIB_KDECORE@
LIB_KDEPIM = @LIB_KDEPIM@
LIB_KDEPRINT = @LIB_KDEPRINT@
LIB_KDEUI = @LIB_KDEUI@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_KHTML = @LIB_KHTML@
LIB_KIO = @LIB_KIO@
LIB_KPARTS = @LIB_KPARTS@
LIB_KSPELL = @LIB_KSPELL@
LIB_KSYCOCA = @LIB_KSYCOCA@
LIB_KUTILS = @LIB_KUTILS@
LIB_POLL = @LIB_POLL@
LIB_QPE = @LIB_QPE@
LIB_QT = @LIB_QT@
LIB_QTOPIA = @LIB_QTOPIA@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LIB_XEXT = @LIB_XEXT@
LIB_XRENDER = @LIB_XRENDER@
LN_S = @LN_S@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJC = @OBJC@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
PAMLIBS = @PAMLIBS@
PASSWDLIBS = @PASSWDLIBS@
PERL = @PERL@
PYTHONINC = @PYTHONINC@
PYTHONLIB = @PYTHONLIB@
PYTHONMODDIR = @PYTHONMODDIR@
QTDOCDIR = @QTDOCDIR@
QTE_NORTTI = @QTE_NORTTI@
QTOPIA_INCLUDES = @QTOPIA_INCLUDES@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
RC = @RC@
SETUIDFLAGS = @SETUIDFLAGS@
SSL_INCLUDES = @SSL_INCLUDES@
SSL_LDFLAGS = @SSL_LDFLAGS@
STRIP = @STRIP@
TOPSUBDIRS = @TOPSUBDIRS@
UIC = @UIC@
UIC_TR = @UIC_TR@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
XMLLINT = @XMLLINT@
XPMINC = @XPMINC@
XPMLIB = @XPMLIB@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
all_includes = @all_includes@
all_libraries = @all_libraries@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
jni_includes = @jni_includes@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_kcfgdir = @kde_kcfgdir@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_qtver = @kde_qtver@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_styledir = @kde_styledir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
kdeinitdir = @kdeinitdir@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
xdg_directorydir = @xdg_directorydir@
xdg_menudir = @xdg_menudir@

KDE_LANG = en
KDE_DOCS = kpegg
#>- SUBDIRS = $(AUTODIRS)  
#>+ 1
SUBDIRS =. en
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =

#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
#>- 	uninstall-info-recursive all-recursive install-data-recursive \
#>- 	install-exec-recursive installdirs-recursive install-recursive \
#>- 	uninstall-recursive check-recursive installcheck-recursive
#>+ 4
RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
	uninstall-info-recursive all-recursive install-data-recursive \
	install-exec-recursive installdirs-recursive install-recursive \
	uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive
DIST_COMMON = Makefile.am Makefile.in
DIST_SUBDIRS = $(SUBDIRS)
#>- all: all-recursive
#>+ 1
all: docs-am  all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
#>- 	cd $(top_srcdir) && \
#>- 	  $(AUTOMAKE) --gnu  doc/Makefile
#>+ 3
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
	cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@list='$(DISTFILES)'; for file in $$list; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
	clean-generic clean-libtool clean-recursive distclean \
	distclean-generic distclean-libtool distclean-recursive \
	distclean-tags distdir dvi dvi-am dvi-recursive info info-am \
	info-recursive install install-am install-data install-data-am \
	install-data-recursive install-exec install-exec-am \
	install-exec-recursive install-info install-info-am \
	install-info-recursive install-man install-recursive \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am installdirs-recursive maintainer-clean \
	maintainer-clean-generic maintainer-clean-recursive mostlyclean \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	tags tags-recursive uninstall uninstall-am uninstall-info-am \
	uninstall-info-recursive uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 2
docs-am:

#>+ 6
force-reedit:
		cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
	cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in


#>+ 21
clean-bcheck: 
	rm -f *.bchecktest.cc *.bchecktest.cc.class a.out

bcheck: bcheck-recursive

bcheck-am:
	@for i in ; do \
	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
	        echo "$$i"; \
	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy $$i.bchecktest.cc; then \
	            rm -f $$i.bchecktest.cc; exit 1; \
	        fi ; \
	        echo "" >> $$i.bchecktest.cc.class; \
	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
	        rm -f a.out; \
	    fi ; \
	done


#>+ 3
final:
	$(MAKE) all-am

#>+ 3
final-install:
	$(MAKE) install-am

#>+ 3
no-final:
	$(MAKE) all-am

#>+ 3
no-final-install:
	$(MAKE) install-am

#>+ 3
cvs-clean:
	$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean

#>+ 3
kde-rpo-clean:
	-rm -f *.rpo

#>+ 3
nmcheck: 
nmcheck-am: nmcheck
